Your Location: Home> Product>Low foaming surfactant for cleaning agent of beer bottle, wine bottle and beverage bottle>Chelating and dispersing agent (the best auxiliary for strong dirt removal, rust removal, optical glass, bottle cleaner)
TA-E dirt dispersant
(Auxiliary for spraying, soaking, ultrasonic, electrolytic degreasing cleaning agent to replace phosphorus)
(Auxiliary agent for phosphorus-free environmental cleaning agent to replace phosphorus)
1. It has a good complexing power to calcium and magnesium ions, strong alkali resistance, unique super strong oil stain carrying and dispersing power, and excellent collaborative detergency;
2. The compound of organic polymer and special high molecular compound can exert good performance in a small amount;
3. High temperature resistance and salting out resistance, with good hard water softening power;
4. Phosphorus-free, environmentally friendly, excellent washability and matching;
5. No precipitation at high temperature (0 ~ 100 ℃) and super alkalinity;
6. Excellent resistance to hard water, wide range of PH values;
7. Combined with conventional additives and surfactants, it becomes a high-quality degreasing agent and cleaning agent.
Generally used to soak industrial detergents, such as metal cleaning agents, metal degreasing agents, cleaning additives, etc. The most common typical uses are medium and high temperature immersion cleaning and dewaxing agents, phosphorus-free environmentally friendly cleaning and dewaxing agents, and medium and high temperature degreasing and dewaxing additives. .
*** The recommended dosage is 1 ~ 10% in the preparation of defatted powder (agent) ***
主要技術指標
數據項目 |
(典型值)
|
備注(不作為產品檢測依據) |
主要成份 |
氨基乙醇類化合物 |
|
離子特性 |
有機聚合物與特殊高分子化合物的復合物 |
|
外觀(25℃) |
無色~黃色粘稠液體 |
|
pH值(1%水溶液) |
9.5 ~ 12.0 |
|
HLB |
11 ~ 13 |
|
靜態表面張力(1%水溶液) |
56.4mN∕m |
|
粘度(25℃) |
959mpa.s |
|
比重(密度)(20℃) |
1.14 ± 0.03 |
|
濁點(1%水溶液) |
>85℃ |
|
0.1%泡沫性能(mm) 50℃±2℃(羅氏泡沫儀) |
0mm |
|
凝固點 |
11℃ |
|
水溶性(室溫) |
無析出物 |
|
|
|
|
檢驗方法
a. 外觀:目測
b. pH值:用酸度計測定。
c. 清洗率:按JB/T 4323.2-1999中第6章規定進行。
d. 泡沫性能::按QB/T 7462-94中規定進行。
e. 水溶性:稱取15g樣品溶于500ml蒸餾水中,加熱至30℃并攪拌3min,攪拌均勻后觀察。觀察后冷至室溫,再觀察。